<-- nev left start -->

2000x1600 TCSA Semi Automatic Band Saw Machine

2000x1600 TCSA Semi Automatic Band Saw Machine
2000x1600 TCSA Semi Automatic Band Saw Machine
Price And Quantity
  • Piece/Pieces
  • 1
  • Piece/Pieces
  • 525000.00 - 4011000.00 INR
    Product Description

    Twin Column Metal Cutting Semi Automatic Band Saw Machine

    MMT – 2000x1600 TCSA Technical Specifications

    •     Cutting Capacity: - Square - 1500x1500mm, Flat – 2000x1500mm & Round – Ø 1500mm.
    •     Clamping Capacity:- Ø200mm. to Ø1500mm.
    •     Cutting Accuracy & Cut Face:- Ø100mm ± 0.1mm.
    •     Cutting Speed: - 20 to 100 mtr./min.
    •     Hardness to be cut: - 70 to 350 BHN.
    •     Maximum weight can be placed on the machine:- 23Tons.
    •     The Machine provide with Hydro mechanical Sensor to locate hard spot in the cutting material And to adjust feed accordingly to avoid damages to Blade and Machine.
    •     Infinitely variable pressure controlled cutting feed and upward return rapid movement by hydraulic cylinder.
    •     Automatic height adjustment for saw frame to save cycle time.
    •     Tungsten carbide face guides with ball bearings.
    •     Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.
    •     Separate Bearing housing being provided to absorbed the axle load due to hydraulic tensioning.
    •     Tachometer use for running at the proper band speed is essential for optimum blade life.
    •     Band speed adjusts by variable frequency drive.
    •     Hydraulic Blade tension and tension releases, no sooner machine is off to minimize fatigue stresses.
    •     Safety System.
    •     Hydraulic band tension with pressure gauge.
    •     Hydraulic Main vice with Double Acting Hydraulic Cylinder.
    •     Double Cylinders in Up down Motion for smooth running.
    •     Chips removing wire brush for band cleaning.
    •     Electrically driven Swarf Conveyor with container for chips collection.
    •     In built rear roller table for cut piece resting.
    •     Coolant System.
    •     Strainer system used for coolant filtration.
    •     Power pack and necessary component.
    •     In built Control panel with all necessary switchgears, fuses indicators & push buttons & mounted on machine.
    •     Saw motor - 20H.P.
    •     Hydraulic motor - 3H.P.
    •     Coolant Motor - 0.50H.P.
    •     Supply - 440 V ± 10 % 50 Hz, 3 Phase A.C. IP 54.

    If you need any further clarifications, please feel free contact to us.

    Trade Information
    • 4 Per Month
    • 15 Days
      Contact Us

      6 A, Industrial Area, Ujjain Road, Dewas, Madhya Pradesh, 455001, India
      Phone :09826245549